compressor surge

[cmspaz]

Actually, I was talking to a longtime DSM'er today, and he stated that his GF has a Neo on her 2G, and it works fine. He said it was more than likely a wiring issue than an actual issue with the device itself.

Verify that you clipped the right wires and put them in the correct places.

[Spyderturbo007]

It depends on the serial number of the Neo. Initially there was a linearity flaw surrounding the airflow corrections. Things become very erratic with the Neo's output and can cause major damage. If the last four digits of your serial number are below 13800 and there is no Karmen compatibility sticker on the back of the unit the unit contains the programming bug.

If you have one of the problematic units, you should remove the Neo and reconnect the MAS wire at pinout #90. Keep in mind, that if you are running larger injectors, you'll need to swap back to stock until you get the Neo fixed. Let me know if you need a copy of the form you have to send back with the Neo.

[tpunx99GSX]

It depends on the serial number of the Neo. Initially there was a linearity flaw surrounding the airflow corrections. Things become very erratic with the Neo's output and can cause major damage. If the last four digits of your serial number are below 13800 and there is no Karmen compatibility sticker on the back of the unit the unit contains the programming bug.

If you have one of the problematic units, you should remove the Neo and reconnect the MAS wire at pinout #90. Keep in mind, that if you are running larger injectors, you'll need to swap back to stock until you get the Neo fixed. Let me know if you need a copy of the form you have to send back with the Neo.

That was a pretty good first post. Welcome to the site.

[lucasoil4u]

lots of boost leaks gonna try to run it again and see what it does. also gonna ry to get the apexi reprogramed. thanks a bunch..

[cmspaz]

lots of boost leaks gonna try to run it again and see what it does. also gonna ry to get the apexi reprogramed. thanks a bunch..
np, man.

Correct me if I've got any bits of this wrong, but here's what I got from the short conversation we had when I picked up the headlights... You had all of the listed goodies on the burgundy talon, which was then totaled, so you swapped them over to the green one, and you're now having problems. Correct?

So wouldn't that point more toward a wiring issue than a programming or version issue?

[lucasoil4u]

whole different motor and setup the purple one was stock tuning no goodies on it at all. exhaust and intake and thats it. thats all that it had. bought the car from someone and now its having problems or has always had the problems.

:beer:

[lucasoil4u]

so when you put in the neo u just dont tap into the wire cause that is how it is done....

[cmspaz]

whole different motor and setup the purple one was stock tuning no goodies on it at all. exhaust and intake and thats it. thats all that it had. bought the car from someone and now its having problems or has always had the problems.
Ah, gotcha.

[lucasoil4u]

will the computer from an automatic 2g work in a manuel one? the automatic one is chipped. :Banane56:

[Spyderturbo007]

It doesn't matter if it's a manual or auto when dealing with a 2g, only with a 1g. The 1g automatics ran 390cc injectors as opposed to 450's so they aren't interchangable.