WTB: 1G 6-bolt Motor Parts

[Halon]

Due to the recent death of my motor, I'm looking at picking up a couple things over the next few months to start the rebuild , depending on the price. I'm sure I'll be searching for awhile (months), as right now I'm not swimming in money, and really just hoping to find someone trying to unload something for cheap that will work with my setup. A lot of stuff will need to be replaced, so I'm just testing the waters to see what people may have laying around, and looking to get rid of for cheap.

Everything is for a 1991 6-Bolt motor.

* 1G Aftermarket Rods - I need a single Eagle rod, but let me know about anything else you have

*1G Forged Pistons - I need a single 2.0 Mahle piston. But 2.0 or stroker 2.3 piston sets are an option as well if the price is low enough. Please let me know what you have.

*1G Head - Mine is trashed. I will be getting crower springs and retainers installed into it. Let me know what all you guys have that you'd be willing to let go for cheap.

*Stroker Crank (6-bolt) - I'm considering going to a 2.3L setup if I can find the parts for the right price. Again, let me know of anything you may have laying around that you'd sell cheap.



Here's what I need to try and fix:
http://mitsustyle.com/forums/attachment.php?attachmentid=7653&d=1219195070

Thanks in advance for looking and anything anyone might have.

[GnArKiLl]

i have a set of brand new wiesco pistons std bore 8:5.1 $350

[Halon]

Thanks for the offer! I do believe I'm at a .020 overbore right now, but will have to verify that. So I'm guessing a std bore piston would work too well for me. But thanks for the offer, I appreciate it.

[TkrPerformance]

call craig he can get it all or pm him

[slowbubblecar]

I have used eagle rods , wiseco pistons in good shape for $400. I also have a built head for sale. The head is the QPR stage 3 port job, has crower springs and retainers, and more porting on the intake side (phenXXXX spacer plate). The head has longer exhaust manifold studs in it for bigger turbo setups needing a spacer plate also. The head needs a new valve or 2 though. It was rebuilt, put on the car, and the pistons hit the valves shortly after install. LMK if you are interested in either.

[Halon]

How much for just the rods?

[slowbubblecar]

I don't want to get rid of them seperately.

[Halon]

Alrighty, thanks anyway man.

[Halon]

Got a barely used rod on the way.

Ordered a new single piston and rod bearings from MAP

Got a 2G head from Andrew.

I think I am set for now. Thanks to everyone who helped out!!!!

[brando]

i have a full 6 bolt you can buy