Log in

View Full Version : MAPerformance FDSM / 4gFD Round #2: 912whp 587ft/lbs

Pages : [1] 2 3
v8klla
08-13-2008, 05:48 PM
http://www.maperformance.com/gallery/pictures/Modifying.gif

At only 43psi we are getting closer and closer to that illusive 4 digit number ;) It seems like it has a lot more left in it, but we need it to hold together for a bit as we are Norwalk bound for the DSM shootout! Any guesses in regards to flywheel horsepower? Keep in mind this is through a 3 speed Ford automatic ;)

http://www.maperformance.com/gallery/pictures/FDSM43psi.jpg

Also, I want to thank our sponsors that have made this build so successful! The new CNC ported cylinder head from Performance CNC coupled with the Forced Performance Camshafts and Kiggly Racing Valve Springs & Retainers really helped on the top end compared to our previous setup!

Active Performance Cooling (http://www.activeradiator.com)
Straight Line Specialties (http://www.straightlinespecialties.com)
Fuel Injector Clinic (http://www.fuelinjectorclinic.com)
JM Fabrications (http://www.jmfabrications.com)
Forced Performance (http://www.forcedperformance.com)
Kiggly Racing (http://www.kigglyracing.com)
Kaaz USA (http://www.kaazusa.com)
Performance CNC (http://www.cncport.com)
Jay Racing (http://www.jayracing.com)
Ksport USA (http://www.ksportusa.com)
Motors By Gosh
Halon
08-13-2008, 05:52 PM
way to go guys!
95talonracer
08-13-2008, 05:53 PM
Looking really good guys. Are you sticking with this tune for the shootout or are you going to squeeze a tad more out of it? By the way what rear end is in the car that you will be running on?
v8klla
08-13-2008, 05:56 PM
Looking really good guys. Are you sticking with this tune for the shootout or are you going to squeeze a tad more out of it? By the way what rear end is in the car that you will be running on?

We will have to turn it down and make some shakedown passes before we can run anywhere near this power level, but even at say 600whp this car should fly ;) It is the OEM IRS configuration with 300M axles and a Kaaz LSD. Although this isn't the optimal setup it should get us by until we can get the four link in there.
Matt D.
08-13-2008, 05:58 PM
Holy shit, that is nuts.
Shane@DBPerformance
08-13-2008, 06:21 PM
Even at 600whp it will probably run deep into the 9s.
Kracka
08-13-2008, 06:28 PM
Great work guys, it sounded like a real beast last Fri!
95talonracer
08-13-2008, 06:30 PM
Any dyno videos?
v8klla
08-13-2008, 07:21 PM
We should have some up soon :)
xheero
08-13-2008, 09:14 PM
ahhhh...... DAMN!