Jdm 4g63t

[munchgsx]

I bought a JDM 4g63 from a buddy of mine today cause it was cheap. %100 complete motor and trans from what I can see. I'm sitting checking it out and notice yellow top injectors and a 16G. Does this mean its from a EVO 3 and is 270 hp with a bit different gear ratios? I didn't think there was anything else made with this stock. If this is a EVO motor/trans I'm very happy as I only paid $440 for all of it. He ordered it about 3 years ago but never touched it, the shell it was going in ended up burning in a garage fire.

[munchgsx]

This also mke me wonder about the compression ratio. Wasn't it 8.5:1 on JDM engines? IDK on this.

[Shane@DBPerformance]

What color is the valve cover? Sounds like it could be a GVR4 RS motor, if it has a red valve cover, yellow injectors and a 16G.

[Kevin 1G Drummer]

6 bolt or 7 bolt? The Evo3 came with a 7 bolt, and I believe the GVR4 had a 6 bolt.

[brando]

its more than likly a vr4 motor. any way you look at it you have a damn good find. congrats

[TkrPerformance]

if you have pics on it it will help.
I could tell you if it is a evo 1,2,or 3 engine if it is not a galant motor

[munchgsx]

It's a red top 6-bolt, I notice that the intake tube looks like a usdm VR4. This would still mean a taller first right? I'll upload a picture in the morning.

[munchgsx]

Also there is no mention of Cyclone on the intake, just says ECI Turbo Intercooled.

[Pushit2.0]

Look for part numbers on everything and see what you can find on the intronets.

~John

[munchgsx]

It's from a 1991 GVR4 RS, it came with 510cc injectors, 16G and 223hp 220ft/lbs o tourque. It has a taller 1st and that's it. $440 bu yeeaaa