clutch issues

[AwdGSX13]

I have a 91' eagle talon awd im having a problem where when i first start it, it will easily go into gear. Once you engage the clutch it wants to hop as if the clutch wasnt all the way engaged. I replaced the clutch/throw-out bearing about a month ago and the master cylinder is new as of today. Question I have is does anyone have an idea of what it could be? Im afraid it might be a problem with the throw out bearing because im having similar issues as i was when the clutch went out.

One question I have is.. how far should the push rod on the master be screwed into the actual clutch pedal itself?

Any help would be appreciated Thanks.

-Matt

[JET]

What kind of clutch did you put in? It sounds like a clutch disk issue.

[AwdGSX13]

OE style 20% better crap clutch lol

[AwdGSX13]

*Update* ive got the transmission out now and the throw out bearing still seams to be fine. Going to further inspect the pressure plate ect.

[johnson]

did you check out your slave cylinder???

[JET]

The slave would make it not want to go in gear. This one goes in gear fine, but doesn't grab well when the clutch is let out.

[AwdGSX13]

*Update* found the problem, Jet was right the friction disk is destroyed... springs all broke... better write this down, cheap clutches dont work.

[awd-drifter]

what kind of clutch did you have?? im plannin on gettin a new clutch kit pretty soon.

[AwdGSX13]

Cheap Carquest clutch lol

[johnson]

i had that problem too many times!!!
i would have suggested that but it was sugested already...
just listen for rattling, and if it rattles when you have it in nuetral, and youre off the clutch, disk is scrap!!!

good thing the clutch breaks and not the trans though...
good thing about those cheap clutches....