FS: O2 housing, fuel pump, FPR, & 2G TBE

[Jakey]

2.5", SS, external dump, Tial 35 or 38mm external wastegate flange, Quick Precision Racing O2 housing
Purchased from Nathan Northrup (Puhrot) in this thread:
http://www.dsmstyle.com/forums/showthread.php?t=14493
The only time it has ever been out of the box has been to take the enclosed pictures.
$150 shipped

Buschur Racing BR/SX Fuel Pressure Regulator Kit
I purchased this from somebody on NABR a couple years ago. Like the O2 housing, the only time it has been out of the box was to take the enclosed pictures. It is missing one of the fittings and the pressure gauge is a B&M, not the generic brand that Buschur normally sends with the kits. You're also going to get a used Walbro fuel pump in unknown condition. I believe it's a 1G AWD 255 HP but I won't guarantee that.
$150 shipped

2G Throttle Body Elbow
$15 shipped

SLS Walbro 255 HP 1G AWD Fuel Pump Kit
I purchased this 3 or 4 years ago and never used it.
$50 shipped

[scheides]

So will this o2 housing need a tial 38mm wastegate? Kinda looks like it?

[Jakey]

So will this o2 housing need a tial 38mm wastegate? Kinda looks like it?
It's for setup for an internal wastegate.

[Jakey]

N/m

[Jakey]

N/m

[scheides]

I think it is confusing because of the shape of the dump tube. It looks like you'd need some sort of 90degree fitting (or an external WG) in there for it to end up pointing down and out the bottom of the car. When you look at the pics you posted, it looks like if you bolt those two directly together, you'll end up with the dump tube pointing directly into the side of your bumper cover....or is that the point? Maybe take a pic of the o2 housing bolted together, might avoid some consfusion?

[carltalon]

Looks like a external setup to me. Unless its a side exit dump tube

[Kracka]

I thought it was for a Tial 35/38mm wastegate at first too (since they are the proper Tial flanges on the dump tube).

[Jakey]

Well hell now that I stare at it some more it appears you guys are right. I purchased it with the understanding that it was for an internal wastegate, external dump configuration but I never tried to install it so I never paid much attention. Looking through some pictures on various websites, it does look like it is configured for a Tial 35 or 38.

Original posted edited, thank you!

[Speedfreak]

The SLS Walbro 255 kit has which pump? Meaning what is the part number? And that is a new pump correct?

Let me know^^, but in any case, I guess I want it(if new). How do you want payment?