asshanson
12-11-2007, 09:34 PM
I need these as soon as possible, so I can get my car running and back up to the twin cities.
1. Harness/wires for a 1g Cam Angle Sensor, it's rectangular and has four prongs I believe, it's the black one (hall effect) if that matters. I have the CAS itself, but nothing to plug it into on my 2g.
2. Banjo bolt and fitting to connect the turbo oil feed line on the head to my stainless line with (-4?) AN fitting (the $20 line from SBR). I originally bought the line to go to the filter housing, and it came with a banjo bolt that is a couple millimeters too wide to fit into the head.
1. Harness/wires for a 1g Cam Angle Sensor, it's rectangular and has four prongs I believe, it's the black one (hall effect) if that matters. I have the CAS itself, but nothing to plug it into on my 2g.
2. Banjo bolt and fitting to connect the turbo oil feed line on the head to my stainless line with (-4?) AN fitting (the $20 line from SBR). I originally bought the line to go to the filter housing, and it came with a banjo bolt that is a couple millimeters too wide to fit into the head.