View Full Version : Rough...
santa
02-23-2004, 01:21 AM
Well after putting the head back onto my car it runs but not that great... I think possibly I have one cam a tooth off on the belt or just my timing is off by a little bit. It doesnt pull at all like it used to.. it struggles to light them up in 2nd in the wet... I used to have no problem doing that on dry... So do you think my timing being off a slight bit could make it that bad? Im guessin so. Just wondering other opinion's? Everything else is fine...just that oh and after driving for a bit and letting it warm up after pushing the clutch in after a quick little rev to say...4k it will idle down and just end up dying but when I start it up again It idles fine...? timing again?
Raptor
02-23-2004, 01:49 AM
Yea, I would say it was probably off. It doesn't have to be that much to make it run like @$$.
santa
02-23-2004, 02:43 PM
im gonna check it today see whats up.
santa
02-25-2004, 07:17 AM
oh man my timing was way off were guessin around 20 degrees retarded... lol its set and runs like it used to !!!!!!!!!!!!!!!!
Iceman
02-25-2004, 08:02 AM
Originally posted by santa@Feb 25 2004, 07:17 AM
oh man my timing was way off were guessin around 20 degrees retarded... lol its set and runs like it used to !!!!!!!!!!!!!!!!
was it degreed wrong or was a tooth off?
MatriX
02-25-2004, 10:41 AM
Ya something wasnt right...cause it wasnt pulling 1/4 as it used to glad to hear shes back up!!
PS you get that WGA issues fixed?
santa
02-27-2004, 12:38 AM
timing was off the tooth is not off its on... no wga fixed yet... check on those seals too yo!
MatriX
02-28-2004, 11:36 AM
Ya ill check when i get to work on thoes seals for ya i always forget when im not busy!!
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.