Bolts for engine

[Andrew7dg]

I need bolts to bolt the engine to the engine stand for a 4g64 but what kind of threads do they need?

Or if I am at the junk yard what bolts from the engine/transmission work?

I usually use bolts from the car rebuild but since all of those bolts are now back in my car I don't have any to use.

[At-Least-It's-An-Evo]

Goto Ace Hardware, they're kinda expensive, but just keep them around. It'll cost ya like $20.

[blageo23]

I heard turbo bolts work.(never tried tho) They didnt have them by the ace by my house.

[xveganxcowboyx]

I don't remember the size. It'ssomething like m10 standard pitch. Pull off the tranny and match one of the transmission bolts to some appropriate length ones at the hardware store.

[Goat Blower]

Yeah, the turbo bolts will work, they're a little short though.

[TwoTalons]

If you end up buying them, find a Fastenal store. Fraction of the cost compared to your local hardware store.

[Pushit2.0]

The bolts you need: M10 x 1.25 x long enough to get 1/2" into the block.

~John

[Andrew7dg]

The bolts you need: M10 x 1.25 x long enough to get 1/2" into the block.

~John


Thats what I need!!! thank you

I went to Ace hardware also and Bought 4 bolts and even though they threaded a nut onto the transmission bolt and threaded the same nut onto another bolt, all 4 bolts wouldn't thread into the block correctly.