View Full Version : Vibration/Noise on Decel
sleepydsm
10-14-2007, 09:18 PM
1g awd 5spd
At highway speeds when decelerating, I hear/feel a noise and vibration, kinda like a thumping. My guess is the carrier bearings on the driveshaft... Anyone have any ideas?
Kevin
Kevin 1G Drummer
10-15-2007, 08:53 PM
I would assume carrier bearings on the drive shaft like you said. When I launch my car I can hear the driveshaft thumping, and on decelleration I can hear it making a little noise sometimes. A good way to check is to grab the driveshaft and see how far it moves in the bearings. On my car, it moves quite a bit inside the bearing case.
sleepydsm
10-16-2007, 11:26 AM
Well, are you refering too the rubber surround that goes around the driveshaft? 'Cause I can grab the shaft and with little effort move the driveshaft all over the place at both bearings.
TkrPerformance
10-16-2007, 11:31 AM
that would be both carrier bearings. They are not to fun to change. mitsu only part also
scheides
10-17-2007, 05:19 PM
Isn't there a cheapo fix for this that works sometimes? Like fill in the bearings with some sort of thick lube or rubber gunk?
scheides
10-17-2007, 05:23 PM
Ahh yes, here it is. Just black silicone caulk:
http://www.plymouthlaser.com/shaft.htm
DO IT! :D
gofastman
10-18-2007, 06:48 PM
check the universal joins as well.
have someone look under the car while you feather the clutch in and out with the parking brake on, this will load/unload the drive shaft so you can check for excesive play
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.