The MAPerformance 4g64 Powered FD RX7 Project Overview

[v8klla]

http://www.maperformance.com/gallery/pictures/forumsig.jpg

We would like to introduce you to the first FD RX7 powered by Mitsubishi. After several months of contemplation and planning this car was assembled in less than one month to be unveiled at the 2007 DSM Shootout. We are very happy with the results and look forward to your feedback!

I would like to start this thread with a big thanks to our sponsors that helped make this project a reality!

Active Performance Cooling (www.activeradiator.com)
Straight Line Specialties (www.straightlinespecialties.com)
Fuel Injector Clinic (www.fuelinjectorclinic.com)
JM Fabrications (www.jmfabrications.com)
6 Distribution (www.6distribution.com)
Bullseye Power (www.bullseyepower.com
FB Performance Transmissions (www.fbperformance.com)
Jay Racing (www.jayracing.com)
KSport USA (www.ksportusa.com)
Motors By Gosh
Wiseco Pistons (www.wiseco.com)
JKODIS Coatings


Project Details:

1994 Mazda RX7 Touring Edition Chassis

MAPerformance 4g64 Shortblock
Custom Wiseco 4g64 Pistons
Precision Machine Work By Motors By Gosh
MAPerformance Stage 5 Cylinder Head
Custom Active Performance Cooling Radiator
Custom Active Performance Cooling Intercooler
Custom Straight Line Specialties Top Mount Exhaust Manifold
Bullseye Power S380 Turbocharger
Custom JM Fabrications Sheet Metal Intake Manifold
(8) 1600cc Fuel Injector Clinic Fuel Injectors
Dual Fuel Injector Clinic Fuel Rails
FB Performance Ford AO3 Transmission w/Chevrolet Bell Housing
Custom FB Performance Torque Converter
Jay Racing Thermostat Block Off / Alternator Relocation / Water Outlet
KSport USA Coilovers
JKODIS Coatings Valve Cover

*Please feel free to pm us with any additional questions regarding the components used in this project!


Project Goals:

1000+whp
Sub 9 Second 1/4 Mile Pass On DOT Approved Tires

*Please note that we are still in need of a roll cage, upgraded rear end, and parachute before this project will see the race track, look for updates later this season!


Pictures:

For pictures taken during the project please visit our website below:

http://www.maperformance.com/gallery/index.php?list=19


The Completed Project:

http://www.maperformance.com/gallery/pictures/FuelPumps.jpg

http://www.maperformance.com/gallery/pictures/Ignition.jpg

http://www.maperformance.com/gallery/pictures/backleft.jpg

http://www.maperformance.com/gallery/pictures/backright.jpg

http://www.maperformance.com/gallery/pictures/frontpassenger.jpg

http://www.maperformance.com/gallery/pictures/enginebay5.jpg

http://www.maperformance.com/gallery/pictures/enginebay3.jpg

*Thank you to those that took pictures of our project at the shootout, if we are utilizing your pictures and you would like us to give you credit for the pictures or remove them completely just let us know!

[Kracka]

Its too bad you couldn't get the turbo to sit just a little bit lower!

[AJ]

Very nice guys! Looks sweet all cleaned up!

[Super Bleeder!!]

Looks amazing. I also used Motors by Gosh. :)

[blageo23]

Ill say it agian, I love the black AN fittings! And the car looks mean!

[Swifty1638]

It was quite the head turner. I was suprised at how well it turned out! Fun fun!

-A. Swift

[Halon]

Looks like you need to incorporate the DSM hood power bulge.

[123abc]

Looks like you need to incorporate the DSM hood power bulge.

X2


Looks fuckin sick. Talkin with one dude asking about how the trip was, and he did mention the 4g64 fd3s. Awesome work guys, you raised some eyebrows.

[scheides]

Need to change that badge on the back to say '4GX7' or something....

[FattyBoomBatty]

I think some filing could have been done on the turbo and shortened it enough to clear the hood. At least the cut is small and nice. Doesn't look too bad. Same with the car. Nice.