View Full Version : WTBorrow/WTRent 2.4L torque plate
1ViciousGSX
07-07-2007, 04:21 PM
A friend of mine works for a machine shop and will be boring/honing his 2.4L .020 over once his Magnus/Ross pistons show up. Unfortunately they don't normally do these engines. We need to borrow or rent a 2.4L torque plate. I will stand behind and vouch for him that nothing will happen to the plate. I will pay insured shipping both ways.
Anybody?
EclipseGST
07-07-2007, 05:13 PM
Correct me if I am wrong but if I remember correctly a 2.0 4g63 torque plate will work for the 4g64.
I have a BHJ Torque plate to bore a 4g63 .090 over if that helps him at all... I will need it for about 2 weeks then it will be available. Let me know.
Super Bleeder!!
07-07-2007, 05:17 PM
a .020 over 4g64 will be 87mm. I'm too lazy to do the simple math to convert a .090 over stock bore 2L into an equivalent measurement. Somebody get on that!
EclipseGST
07-07-2007, 05:21 PM
I thought 4g64's were 86mm so .020 over would be 86.5mm.
87mm on a 2.0 - 4g63 is .080 over.
Maybe I'm wrong.
Super Bleeder!!
07-07-2007, 06:20 PM
stock bore 2.4s are 86.5mm. The .020 over wiseco box i have says 87mm.
http://en.wikipedia.org/wiki/Mitsubishi_Sirius_engine#4G64
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.