Fuel Injector Part Name

[blageo23]

I was going to install my fuel injectors today but I went to put the insulators on(oring deal inbetween the head and injectors). When I put them on I noticed that 3 fuel injectors have a black plastic sleeve on them and one didnt. The one that doesnt have it the insulators is loose and doesnt seal. Anyways where the hell can I get one of these? The injectors are FIC 650CCs.

[blageo23]

Anyone?

[95talonracer]

Aren't the stock ones the same?

[carltalon]

Is the sleave on the fuel rail side? does it hold the injector tight between the rail and the head? If thats what you need I might have one laying around.

A pic might help.

[blageo23]

My rents took the digi. Im trying to find a pic of it but I cant :(. It doesnt have anything to do with the fuel rail at all.

[xveganxcowboyx]

Are you talking about these? http://slowboyracing.com/estore/product.php?productid=2069&cat=1063&page=1 If so going with fresh ones is probably a good idea as they like to get hard and will leak. The dealer probably has them so you don't have to order.

[blageo23]

Those are the insulators I am talking about. BUT the piece that I actually needs fit inbetween those and the injectors.

[95talonracer]

There is a sleave that goes inbetween the injector and that black bushing? How thick?

[blageo23]

Yah on my injectors there is. Its not thick at all <1mm(way small)

[JET]

He is talking about the little cap that is on the end of the injector. Are you sure they are FIC's? I didn't think FIC's used that style, I don't think mine did anyway. Most other style injectors do use the pintle style that has that sleeve on it, like the stockers.