PDA

View Full Version : Throttle Cable "Ends" Or "Connectors"

blageo23
05-22-2007, 10:15 PM
Im looking for somewhere to get the endes for a throttle cable(the little cylinder that tooks up to the TB). Or a connector to connect 2 throttle cables together. Lets pretend that I cut my throttle cable and need to put it back together. Anyone know where to get these?
95talonracer
05-22-2007, 10:44 PM
I think that bike shops have them where it slides on and you crimp it or use an allen.
blageo23
05-22-2007, 10:45 PM
Thats where I was going to check next.
Goat Blower
05-23-2007, 05:42 PM
It'd be easier to just replace it.
blageo23
05-23-2007, 07:29 PM
But I got the universal one like you have and I cant get it to go onto the TB.
munchgsx
05-23-2007, 08:28 PM
Check with someone that does alot of small engine work or a place that deals with ATV's such as Dennis Kirk.
Jakey
05-24-2007, 01:36 PM
Go to a lawn and garden store.
Goat Blower
05-24-2007, 02:58 PM
But I got the universal one like you have and I cant get it to go onto the TB.

Ahh, that makes more sense. I used the stock cable inside the Lokar shielding so the factory mount for the throttle body is retained and I used the screw type connector on the other end that hooks on the top of the pedal. Works perfect.