PDA

View Full Version : shoulda done a 6 bolt

Pages : 1 2 [3] 4 5
A//// Guy
02-19-2007, 02:57 PM
Dang I lose. Too used to the 1G setup.
Onefast99gsx
02-19-2007, 03:31 PM
Mine is a 7bolt and my CAM sensor sits in the same spot as a 1g, right next to the thermostat housing. I guess I thought they were in the same location on all 4g63's.
johnson
02-19-2007, 04:38 PM
well its not cranking fast enough.... and clutch seems to not release all the way???? could it be in the clutch system????
compression is
#1: 30 psi
#2: 35psi
#3: 25psi
#4: 40psi

could that be from just cranking slow????
Onefast99gsx
02-19-2007, 04:49 PM
The clutch would have nothing to do with the compression numbers. You'd be testing the compression with it in neutral anyways.

You'd get slightly lower numbers with slower revolutions like if the battery was weak but those numbers are incredibly low.
johnson
02-19-2007, 05:04 PM
the wheels are off the ground and when i crank in neutral, wheels spin forward, crank in gear wheels spin forward, crank in reverse and wheels spin backwards????

CRANKWALK or clutch???
johnson
02-19-2007, 05:05 PM
even with a jump, crank is still slow.... not close to sounding strong enough to start.....
tim
02-19-2007, 05:25 PM
well its not cranking fast enough.... and clutch seems to not release all the way???? could it be in the clutch system????
compression is
#1: 30 psi
#2: 35psi
#3: 25psi
#4: 40psi

could that be from just cranking slow????

You obviously have something wrong here. Those compression numbers are way way low, obviously.

Are you cranking with the throttle plate all the way open? Are your cams properly installed?

he wheels are off the ground and when i crank in neutral, wheels spin forward, crank in gear wheels spin forward, crank in reverse and wheels spin backwards????

CRANKWALK or clutch???

Sounds like you dont have the clutch assembled correctly. Obviously in neutral your wheels shouldnt move.

How about cranking with the clutch pedal pushed in and properly bled? What does it do then?
johnson
02-19-2007, 05:28 PM
bled and all.... does the same and feels really soft....
CDeutsch
02-19-2007, 06:05 PM
the wheels are off the ground and when i crank in neutral, wheels spin forward, crank in gear wheels spin forward, crank in reverse and wheels spin backwards????

That's pretty odd. That would be a tranny issue if the wheels are spinning forward in neutral regardless of how screwed your clutch and engine may be.
x-pride
02-19-2007, 07:27 PM
Johnson just please step away from the car. I hope you don't work on that RX-7. That rotary is going to own you. To bad Acid Drumz is not in town. He could of gave you a hand. Now I know where my dam RTV went damn you Johnson. Good luck man. This cheered me up today.