Log in

View Full Version : Oil Pressure Gauge?


Pages : [1] 2

ExTREME
12-13-2006, 05:14 PM
So after I successfully installed my first tranny I was going through the reinstallation and hookup process. Well I started my car, the gauge on the cluster shows no Oil Pressure/Level? I checked and I have plenty of oil, I changed my oil, fixed my radiator hose leak blah blah blah. I hooked up my DSMlogger and it shows I have pressure. Shows in the "atm" unit. I'm not sure on the correct level but why is my oil gauge not working!? Anyone know what the DSMlogger should be reading for OILP - ?

Thanks!
-SA

tim
12-13-2006, 06:38 PM
There is a wire that connect to the oil filter housing that can fall off easily. Check to make sure it is still hooked up.

ExTREME
12-13-2006, 06:49 PM
A black plastic clip that go's into another? About the size of a skinny mans finger? I checked, I'm pretty sure it was plugged in, I'm thinking it is something up top in the engine bay. I unplugged a bunch, I labeled tthe plugs but must've missed one. I'll check the housing and trace the wires tomorrow.
Thanks dude with Evo
-SA

tim
12-13-2006, 06:52 PM
The plug on the housing is a little rectangular black piece that slides over a button style connector on the oil filter housing.

If your logger shows pressure I am sure it is plugged in. I missed that the first time I posted.

ExTREME
12-13-2006, 06:54 PM
True. How would my logger be showing but my Gauge not...?
Does anyone know how much pressure I should be showing. All measurements please

ExTREME
12-13-2006, 06:59 PM
Im at 8.9 PSI @ 843RPM(idle)

ExTREME
12-13-2006, 11:34 PM
Ok I just went out and dinked around with the wires underneath by the wheel, all connected. I went thru my DSMlogger logs and I didn't get anymore than 28psi at 3k. I'm fuckin freakin out. Anyone know the stock PSi for these beasts? I'm averaging 8psi at 850rpm(idle) and about 27psi at 3k. I'm not driving this thing anymore...

Chris
12-13-2006, 11:59 PM
Ya tell me about it, At idle... My Car has No Oil Pressure - According to the OEM gauge. I plan to hook up a aftermarket oil Pressure gauge to see where it sits at.

mdost03
12-14-2006, 12:44 AM
What is the oil pressure suppose to be at for a 4G63? My 420a, when warmed up, sits at around 20-25 psi at idle, 50 cruising, and 70 WOT.

niterydr
12-14-2006, 02:34 AM
Those oil pressure levels seem low.
I'll do some research tommorrow to see what spec is suspose to be, but at first glance your oil pump could be in the beginning stages of fatigue/age/wear.