PDA

View Full Version : dip stick!

Pages : [1] 2
Pimpin Dsmstyle
11-04-2006, 07:22 PM
91 talon tsi AWD turbo. Dip stick pops out. WTF is that all about? lol.

This is like the smallest problem I've ever had and I have no idea how to fix it.. help please? rawr
Pimpin Dsmstyle
11-04-2006, 07:39 PM
Crank case pressure?
Matt D.
11-04-2006, 07:50 PM
Crank case pressure?Yes, caused by blow by. Get a new dip stick and all should be good.
1ViciousGSX
11-04-2006, 08:01 PM
Also check your pcv valve.
Pimpin Dsmstyle
11-04-2006, 09:22 PM
Also check your pcv valve.


How does a guy go about doing that ^^ ? I'm getting check engine lights every now and then also. Could be related possibly?
xveganxcowboyx
11-04-2006, 10:12 PM
PCV is located on the back passenger side of the valve cover. Just unhook the hose and unscrew it. It should only allow air to pass one direction. You can blow in it, but I think you should hook a compressor up to it to really check it's functionality.

BTW a new dipstick from Brookdale is less than $13 and a PCV less than $6.
Pimpin Dsmstyle
11-04-2006, 10:47 PM
PCV is located on the back passenger side of the valve cover. Just unhook the hose and unscrew it. It should only allow air to pass one direction. You can blow in it, but I think you should hook a compressor up to it to really check it's functionality.

BTW a new dipstick from Brookdale is less than $13 and a PCV less than $6.


nice. Thanks for the info!
tim
11-04-2006, 11:21 PM
Bah, the most n00b question there is on a DSM forum. I thought you have been around for a while.;)

If you want to go ghetto cheap just crimp the dip stick tube.
Pimpin Dsmstyle
11-05-2006, 01:03 AM
Bah, the most n00b question there is on a DSM forum. I thought you have been around for a while.;)

If you want to go ghetto cheap just crimp the dip stick tube.

I already knew what it was. Just wanted to know if there was other possabilities. I've never ran into this problem in any of my 10 dsm's I've owned. My problems are usually alot larger than this :P

20 bucks for a PCV valve and dip stick is good enough for me :) No need to ghetto cheap that. If you can't afford 20 dollar fix, you don't belong owning a dsm!
gofastman
11-06-2006, 05:44 PM
SleepyDSM came up with a clever fix for this.
he looped some wire through the dipstick handle and secured the wire to the tube via hose clamp