Log in

View Full Version : Alignment ???s

Pages : [1] 2
turbotalon1g
08-28-2006, 06:41 PM
I just put in my KYB GR2s and Pro-kit springs and i need an alignment, my question is do i need a camber kit for the car now and where can i get a good alignment?
I have 17s to put on my car will it make a diff. between the 17s and the 16s that are on right now?
THx
Aaron
tim
08-28-2006, 08:06 PM
Wheel size wont make a big difference but yes you will more than likely need an alignment not only due to the drop but due to the fact that you changed the struts.

I dont know who will align it for you up in the TC area. Most places wont get into shimming your control arms or installing a camber kit. If you have a friend that works in your shop it would probably be your best bet.
CVD
08-28-2006, 10:43 PM
I just put in my KYB GR2s and Pro-kit springs and i need an alignment, my question is do i need a camber kit for the car now and where can i get a good alignment?
I have 17s to put on my car will it make a diff. between the 17s and the 16s that are on right now?
THx
Aaron
Here, talk to "Jeff the Alignment Guy" about the alignment.
http://forum.mnautox.com/forums/showthread.php?t=5140&highlight=jeff+alignment+guy

And dont burn up those tires on the 17's. I want to buy them. ;)
Halon
08-29-2006, 06:22 AM
Talk to 1quick4.
scheides
08-31-2006, 11:28 PM
Search on here...I took my car to hoover and they did a kick ass job!
turbotalon1g
08-31-2006, 11:55 PM
i searched already, anyway. I pm'd 1quick4 no response, i think that i am just gonna buy the rear camber kit and take it to hoover or jeff, which are pretty much the same since he used to work there i guess or still does?
Either way both have an excellent rep.
sleepydsm
09-01-2006, 09:41 AM
What hoover are you talking about? I too have the ingalls rear camber arms, and will need an alignment after i get my Ksports and the arms installed. Let me know what you do/ who you go through/ and the results.
sleepydsm
09-01-2006, 09:47 AM
oooooooooooooo I know that Jeff guy! I deal with him often through my work, seems like a nice guy. I need to set up an alignment with him.
scheides
09-01-2006, 11:54 AM
I went to the one on East Hennepin in Minneapolis, there's another one on N. Washington near Elite. I highly recommend these guys. It was a little on the expensive side ($125?) but the car drove like a DREAM. Well worth it.
95talonracer
09-01-2006, 12:04 PM
I would go to "Andover wheel and frame". They are reasonably priced and seem to do good work.