PDA

View Full Version : About Modern Automotive Performance


Pages : [1] 2

v8klla
07-04-2006, 07:52 PM
Visit us on myspace!

www.myspace.com/maperformance

Who We Are:

The shop is currently comprised of Chris Carey (President and Owner), Kyle Nelson (Shop Manager and Master Tech) formerly of Quick Precision Racing which was located in St. Paul, Minnesota, Alex Wolner (Performance Tech and Customer Service), and Bill Tschida (Sales, Web Development, and Customer Service). We also have several well trained part time technicians.

We have been active members in the automotive community for several years, and have extensive background in regards to all vehicles, with a focus on forced induction. We own and race several different vehicles, which will become shop cars in representation of MAPerformance. Our fastest pass to date is 9.92 @ 148mph! However, plans are in the works to GREATLY surpass this time. The same car recently made over 709hp at the front wheels!


What We Do:

Dynamometer Service: Our Dynojet 224x dynamometer is installed in ground for easy access. Pricing is some of the lowest around at just $75/ hour with you tuning, or call us for additional specials or group rates.

High Performance Products: We have very competitive pricing on products from ACT to Walbro plus many more.

Installation Services: From basic to complex, we can install you performance products. Our shop rate for this service is just $110/hour.

Custom Welding and Fabrication Services: From custom intercooler systems to metal fabrication we can help you with your latest project. Hourly rate for this service is just $110/hour!

When We Are Open:

Unlike the rest of the automotive industry we are open later and 7 days a week!

Hours

Mon-Sat: 9am - 7pm
Sunday: By appointment only at the shop. Available by phone and email from 10am to 8pm.


Where We Are Located:

9855 13th Ave N
Plymouth, MN 55441

From the southeast:

94 West > 394 West > 169 North > 13th Ave Exit > Left on 13th Ave > Straight to Southshore Industrial Center > Take second right, we are located on the far side of the building.

From the southwest:

494 North > 394 East > 169 North > 13th Ave Exit > Left on 13th Ave > Straight to Southshore Industrial Center > Take second right, we are located on the far side of the building.

From the northeast:

694 West > 169 South > 13th Ave Exit > Right on 13th Ave > Straight to Southshore Industrial Center > Take second right, we are located on the far side of the building.

From the northwest:

694 East > 169 South > 13th Ave Exit > Right on 13th Ave > Straight to Southshore Industrial Center > Take second right, we are located on the far side of the building.


Why Open A Shop:

For years we have had problems with the vendors in this industry. From shipping delays to incorrect parts and/or advice, we are fed up with the lack of customer service in the automotive community. We are here to provide you, the enthusiast, with competitive prices, high quality service, and fast shipping. It is out hope that this dedication will ultimately help us develop a long term relationship with our customers.

Payment Methods Accepted:

Cash
Money Order
Cashier's Check
Visa
Mastercard
American Express
Discover
Paypal

*Personal checks may be accepted from customers personally known and trusted by our staff.

niterydr
07-05-2006, 12:42 AM
Welcome to the forums. Lets get some shop pics up :).

Kracka
08-22-2006, 10:45 AM
What do you charge for just a few pulls on the dyno?

v8klla
08-22-2006, 11:33 AM
There is a minimum of one hour, so $75.

Kracka
08-22-2006, 11:45 AM
There is a minimum of one hour, so $75.
Can that be split between multiple cars?

v8klla
08-22-2006, 11:57 AM
Unfortunately no, it is the strapping down of the car that is the reason behind the one hour minimum...

Chris

Kracka
08-22-2006, 12:04 PM
Thanks for the info :)

Goat Blower
08-22-2006, 05:56 PM
Can that be split between multiple cars?

Sure, six cars, one every ten minutes. Cheapazz. :p

Kracka
08-23-2006, 08:24 AM
Sure, six cars, one every ten minutes. Cheapazz. :p
Haha, when you have a car that only needs 1 pull it makes sense! Anything more than 1 pull for me is just wasting gas.

Halon
08-26-2006, 06:03 PM
Thanks for showing us around today a little bit Chris. Place doesn't look too bad at all.