Log in

View Full Version : A little help

Pages : 1 [2]
Halon
06-22-2006, 08:20 PM
Where do you live?
1QUICK4
06-22-2006, 08:30 PM
Where do you live?

-------------------------------------

I live in plymouth,
Halon
06-22-2006, 08:34 PM
I hate you!!
96tsiawd
06-23-2006, 09:52 AM
checked all fuses, and relays. All fuses work perfect. I took out the A/F gauge and reset the ecu though it still runs in safe mode. The car is seeing 3hz on my safc2 [like it does when the car is off] but when its running. So this leads me to think its the MAS. Also the TPS is reading 100% which is why it kills, [running pig rich]. I checked resistance like the chiltons told me to and it reads connections 1 and 4 @ ~.76 ohms and when I check 2 and 4 and open the throttle it doesnt read at all. So I dont know if the ECM fried and is just not reading the TPS right or if the MAS and TPS were taken out when the wires contacted. Any other suggestions. I am willing to pay for a 2g stock mas if anybody knows of one around for reasonable.
96tsiawd
06-23-2006, 02:56 PM
okay, so after hours of searching on dsmtuners/talk/vfaq I found somebody with an EXACT same problem as me that shorted wires exactly like I did the safc read 3hz, the TPS was at 100% and the car ran at like 200rpm. So the problem is the ecu!

He changed the ecu and it was gravy.

So anybody know of a 95/96 GSX 5spd ecu that I can buy?