View Full Version : recirculating bov question
kslice88
05-29-2006, 10:43 PM
i was wondering if theres any other way to not run a recurculating bov without goin with a maf translater cuz thats overkill for the power (or lack of) that i have
scheides
05-29-2006, 11:00 PM
AEM with a MAP sensor, but maybe that's overkill too?
MAF-T is a great mod for the money, even on a small-turbo setup it's nice! More free flowing than the stock MAS that's for sure!
LightningGSX
05-30-2006, 05:25 AM
If you figure out a way to keep it closed during idle, you won't have any major problems.You might be able to rig up a ball and spring valve or something like that in the vac line.Just make sure it still opens when the throttle closes under boost.
TheBlizzard
05-30-2006, 06:02 AM
i was wondering if theres any other way to not run a recurculating bov without goin with a maf translater cuz thats overkill for the power (or lack of) that i have
My first question is why? My second question is what yeah and kind of car? Any other mods? Your question is rather vague and is going to get deleted if you don't clarify what you are asking.
CornFed2.4
05-30-2006, 03:49 PM
This is the #1 question asked In DSM related websites not to be a Dick but just look before you post. You cannot vent your blow off valve without puting your MAF behind the BOV
Also heres another website with some more answers
http://www.dsmtuners.com/forums/showthread.php?t=113858
1ViciousGSX
05-30-2006, 07:38 PM
This is the #1 question asked In DSM related websites not to be a Dick but just look before you post. You cannot vent your blow off valve without puting your MAF behind the BOV
Also heres another website with some more answers
http://www.dsmtuners.com/forums/showthread.php?t=113858You can do it, but it will run like crap when shifting when it goes rich.
kslice88
05-30-2006, 10:31 PM
sry i didnt specify, i read on it but had more questions. i know that if u dont run a recirculating system then you'll run rich, its a stock 14b set up with a hard upper pipe and the flange was welded in a wierd spot for recirculating system so i was hopin there was a cheap way to not run it
1ViciousGSX
05-30-2006, 10:38 PM
Just run it open, if you can deal with it, let it vent, if you can't, do what it takes to recirculate it.
kslice88
05-31-2006, 09:57 PM
i just dont want to run really rich when i shift but i might have to until i can afford a maf-t
longemoco
06-01-2006, 02:09 AM
i was venting my type rs on my gst with no problems, i heard that only some dsm's don't like to vent bov's
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.