PDA

View Full Version : 91+ - 90 Ecu


Pages : [1] 2

Pimpin Dsmstyle
04-04-2006, 12:13 AM
I might buy a 90 FWD eclipse GST. it was an auto, converted to manual. They aren't sure if the ECU is a manual or Auto. What parts off of what cars would I need to convert to a 91 + fwd turbo ECU?

I guess if someone had a 1990 fwd turbo dsm ecu, you could let me know :P

Kracka
04-04-2006, 12:18 AM
No parts needed, simply switch I believe 2 wires around for a 91-94 ECU to work in a 90. For the time being, you could use that 90 ECU even if it is for AT aslong as you run a SAFC too.

Pimpin Dsmstyle
04-04-2006, 12:22 AM
No parts needed, simply switch I believe 2 wires around for a 91-94 ECU to work in a 90. For the time being, you could use that 90 ECU even if it is for AT aslong as you run a SAFC too.
I don't have an SAFC anymore :(

I thought I read something about switching out a transistor or something like that. I wish I remembered which thread I read about this in.

Kracka
04-04-2006, 12:43 AM
Nope. I swapped ECU's in a friend's car once and it was nothing more than switching 2 wires around. I don't remember which onces but it should be pretty easy to find.

x-pride
04-04-2006, 12:56 AM
Go to 4g61t.org and look at the tech notes.

Pimpin Dsmstyle
04-04-2006, 02:26 AM
91-94 ECU's are compatible, however there where some changes.
On the 24 pin harness, wires #6 and #14 control idle, and air flow.

So if you use the 91-94 ECU p pins/wires 6 and 14 and you are go to go

...........................

that's the only thing I found on 4g61t.org that gave me anything related. I'm sure there is more somewhere, but I didn't see anything else. I also saw them say it doesnt matter if it's an AWD or FWD tranny... hmm?

So according to them I could use my 92 AWD ECU 5 spd and just change the idle / air flow wires around and I'd be good to go? That seems too simple..

slowbubblecar
04-04-2006, 11:45 AM
I have a 90 ecu I want $70. I want $70 for it.

Pimpin Dsmstyle
04-04-2006, 11:52 AM
I have a 90 ecu I want $70. I want $70 for it.
FWD turbo ecu?

slowbubblecar
04-04-2006, 12:02 PM
I don't remember if it was fwd or awd but it is a turbo ecu. I thought it was an awd one but they both work. I had one of each and I only know where 1 is. I know the 2g fwd ones have speed limiters in them at 130, but I don't think the 1g ones have speed limiters. It should work perfectly fine. I don't think there is a fwd or awd difference accept the fwd one maybe having a speed limiter. It will work either way, FWD or AWD.

Pimpin Dsmstyle
04-04-2006, 12:07 PM
I don't remember if it was fwd or awd but it is a turbo ecu. I thought it was an awd one but they both work. I had one of each and I only know where 1 is. I know the 2g fwd ones have speed limiters in them at 130, but I don't think the 1g ones have speed limiters. It should work perfectly fine. I don't think there is a fwd or awd difference accept the fwd one maybe having a speed limiter. It will work either way, FWD or AWD.
I'll let you know before this coming weekend james. I won't know if I'm buying the car until then.