View Full Version : What Gauge Should I Get?
blageo23
02-05-2006, 04:18 PM
Flame if you will... Right now I have the gauge cluster gauge holder with 2 gauges. I want to go with a triple Apillar. Right now I have boost and EGT. I need a third one. Im thinking either Oil pressure(and go with a N/A guage cluster), Oil temp or Wideband O2. Any body have any POSITIVE Input?
Thanks,
Mike
Kracka
02-05-2006, 04:29 PM
Wideband o2 would be useful.
Agreed on wideband O2. I also like water temp since I always had to keep on eye on that in my talon.
Jepherz
02-08-2006, 04:25 AM
I would go with a wideband if you can afford it, since its necessary for tuning anyways. If not, go with oil pressure.
niterydr
02-08-2006, 09:28 AM
Triple gauge:
1)Boost
2)Wideband 02
3)Oil pressure
EGT's are useless compared to the above.
scheides
02-11-2006, 12:36 AM
I agree, go wideband. PLX-M250 w/ gauge or something similar. Best way to see wtf is going on.
Swifty1638
02-11-2006, 12:39 AM
oil psi water and boost..what I run.
-A. Swift
1ViciousGSX
02-11-2006, 12:27 PM
Boost
EGT
W-B O2
I dis-agree with the "EGT is useless" attitude. If you understand what it's telling you, there is some good info in those readings. ;)
Shane@DBPerformance
02-11-2006, 01:37 PM
An EGT gauge is mostly only useful, if you are running a stock ECU and you don't have a way to datalog timing. Then you can somewhat use it to know when you are knocking bad and the stock ECU is severly retarding the timing. Otherwise, it doesn't tell you if you rich, lean, or even close to tuned correctly. They are useful, if you run one on each cylinder and want to do individual cylinder tuning for maximum overall power and reliability.
blageo23
02-11-2006, 04:39 PM
Well I already have the Boost and EGT so Im not going to get rid of them. Who makes a Wideband? I know AEM does, Anyone else?
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.