Engine sleves?

[snea]

I was just wondering if the 2g blocks are sleved.

P square

[MustGoFaster]

No they are not from the factory.

[snea]

Does anyone here have any experience doing it with these engines?

[tim]

Does anyone here have any experience doing it with these engines?
What do you have planned? The stock sleeves are reliable enough for just about anything you could throw at it.

Does Shep or Rau even run aftermarket sleeved blocks?

[snea]

Well, I believe I bought a car with a blown head gasket, and possibly a cracked block. I believe the engine was stock. I think I might just take the engine out and put a jdm pull off back in place of it.

[Shane@DBPerformance]

Usually it is just cheaper and easier to replacement the block with some other donor than to pay to have a cracked sleeve fixed.

[snea]

Ok, that's what answers my questions, THANKS.

P square.

[JET]

Research on the JDM thing too. It has been brought up many times here. The Cliff's Notes are: don't buy JDM, get an american block. It isn't a Honduh.

[Pushit2.0]

4g63's are sleeved? cool.

[Speedfreak]

4g63's are sleeved? cool.

I got the special double sleeves in cylinder 1 and 2:).